The loss during transportation of aluminum products is nothing more than the following points: scratches, bumps, and oxidation in water. Wrong loading method is the main cause of losses.
Therefore, pay attention to the following when loading aluminum plate, aluminum strip and aluminum foil products:
First, because metal products are heavy, they must be stable and cannot be placed on top of other goods to avoid tilting, crushing, and collapsing. They must be placed at the bottom of the carriage; aluminum plates can be stacked in layers, but they must not be too high. 4 floors are appropriate;
Second, the hardness of aluminum products is generally low, so it is necessary to prevent bumps during transportation, especially aluminum foil is more prone to bumps and bumps. Therefore, protection must be done when loading, unloading, and transshipment. Spreaders should use soft belts, corners should be used where aluminum products touch, and other goods in the carriage should be reinforced to avoid bumping the aluminum plates during driving; so as to ensure The safe arrival of the goods.
Finally, the aluminum plate should be covered with waterproof cloth to avoid the loss of the aluminum plate due to rain, snow and other weather reasons. I hope that the above precautions for maritime transportation of aluminum plates, aluminum strips and aluminum foil products can help you better transport and store aluminum plates and aluminum coils, and protect aluminum from damage. If you have any demand for aluminum products, please contact Jack Han [email protected]